ATTENTION! The charger has no reverse polarity protection!

Opus BT-C100: Charger with analysis functions.

Compact yet professional multi-chemistry charger with analysis functions. With many small detail improvements compared to its big brother BT-C3100, the Opus BT-C100 as a single-bay charger now brings a convenient method of switching between battery types directly via the buttons on the unit. Li-Ion 4.20, Li-Ion 4.35, LiFePO4 and NiMH/NiCd batteries are supported. And most importantly, the BT-C100 is now silent.

With informative display: The display shows battery voltage, charging current, internal resistance, charged or discharged capacity and the current elapsed time. The voltage display is continuously updated, even after the end of charging, and thus shows the actual voltage at all times.

Different charging programmes for the care & analysis of your batteries: Charging, discharging, refresh programme to combat the memory effect in NiMH/NiCd cells, capacity measurement during discharging, quick capacity test.

The following Li-Ion battery types can be charged with the Opus BT-C100 charger:

10440 / 14500 / 14650 / 16340 / 16650 / 17500 / 17650 / 17670 / 18350 / 18490 / 18500 / 18650 / 18700 / 26500 / 26650 / 20700 / 21700 / 32650
as LiIon batteries IMR, INR & ICR (nominal 3,6V - 3,7V) up to 4,20V
as LiIon batteries (nominal 3,85V) up to 4,35V
as LiFePO4 batteries (nominal 3.2V) up to 3.7V

The following NiMH/NiCD battery types can be charged with the Opus BT-C100 charger: AAA, AA, C & D

Product information:

• One charging slot, supports rechargeable batteries up to 32650
• Supports LiIon 4.20, Li-Ion 4.35, LiFePO4, NiMH & NiCd batteries
• LCD display shows actual battery voltage, capacity & charge current
• Charging current selectable from 0.2A to 1.6A (LiIon) or 2.0A (NiMH/NiCd)
• Discharge current selectable from 0.1A to 0.6A (Li-Ion) or 1A (NiMH/NiCd)
• Battery analysis: internal resistance measurement, capacity measurement during discharging & charging
• Battery care: Refresh programme for NiMH&NiCd batteries
• Repair function for deeply discharged batteries
• Charges a mobile phone connected via USB with up to 1A and functions as a USB power source on the move (5V, 2.4A) when a lithium-ion battery is inserted
• Power supply via supplied 12V /1A mains adapter. Alternatively via MicroUSB cable (5V, 2A) or car charger cable (optional accessory)
• Low heat generation, temperature monitoring, short-circuit protection.

Test reports on the Opus BT-C100 charger and manufacturer page: Opus BT-C100 Review at Lygte-Info.dk, Opus BT-C100 review at mountainprophet.de

Scope of delivery: Charger, power supply unit, German manual