RISK F-1 speedboat

Speedboat Risk F-1 buliding kit

Vacuum formed boat parts are made of ABS material. For transportation and building process are covered by polyethylen foil to avoid scratches.For their assembly is recomended to use cyanoacrylate medium glue and glue for ABS, for painting the colors made for ABS surfaces.Model is very stable at any speed. For case of turning upside down is equiped with flooding chamber which returns the boat to its normal position.In rear part of hull are holes for engine steering rods and tubes with cooling water fitted with rubber grommets.Supplied plywood stand can be also used as pattern for setting the engine's angle (when recommended motor Risk F-1 is used).

Recomended equipment:

Outboard motor RISK F-12pcs standard size servos (like HS-322HD) for motor steering and tiltWater cooled brushless ESC for current 50ALipol akku 2S-3S with capacity approx 2200mAh

Kit contents:

Glued and cleaned ABS hullFormers for Servos, Rx and AkkuPlywood motor mountPlywood standPushrods with ball linksSet of stickersDetailed text building manual with pictures

Lenght (bez motoru) [mm]: 445 ; Lenght (s motorem) [mm]: 510 ; Width [mm]: 205 ; Height [mm]: 130 ; Building difficuilty: S1 ; Difficuilty of piloting: P2

Length (bez motoru) [mm]	445
Length (s motorem) [mm]	510
Width [mm]	205
Height [mm]	130
Build difficulty	S1
Operating difficulty	P2