FOXY 500 Race 7.2V brushed motor

FOXY 500 Race 7.2V brushed motor

3BD1020
Europos sandėlyje, pristatoma per 2 savaites
15,21 €
Su mokesčiais Pristatymas 1-2 darbo dienos, negalioja EU sandelio prekems

Aprašymas

Brushed electric motors of „FOXY Brushed“ range are perfect for a whole lot of model builder's applications - for powering aircraft, boat, car, tank and other ground vehicle models either with direct drive or with a  gearbox.
When connecting and installing foxy motors, pay attention to the allowed voltage and load current limit.

Motor cooling: operating temperature of the housing shouldn't exceed 80°C. The model should always have sufficient air intake and air-flow around the motor. For boat models, we recommend using water cooling.  High motor loads are possible only for short periods. After every driving/riding/flying session, you should let the motor cool down to a room temperature before the next ride/flight/drive.

FOXY 500 Race 7.2 V is a brushed electric motor size "540" with a shaft with a diameter 3.175mm and plain bearings. It is suitable for powering indoor aircraft models with direct drive (5x5" propeller) or with a gearbox for a small car and boat models (30mm propeller).

For controlling the RPM, you will need an ESC with a load capacity of 30–40A.

FOXY 500 Race 7.2V is a suitable replacement for a motor SPEED 500 Race 7.2V (product number 7306).

Set contains:

  • Brushed electric motor FOXY 500 Race 7.2V
  • User manual

Voltage (jmenovité) [V]7.2
Voltage (provozní) [V]3.7 - 12
RPM at rated voltage [ot./min]23500
ESC [A] 30 - 40
Diameter [mm]36
Length (skříně) [mm]50
Shaft diameter [mm]3.175
Free shaft length [mm]12.5
Weight [g]189

Prekė detaliau

Nauja prekė

Atsiliepimai (0)

Nėra atsiliepimų
Produktas pridėtas prie pageidaujamų











Atostogaujame nuo Kovo 28d. iki balandžio 8d.,

Naujus užsakymus galėsime išsiųsti balandžio 9d.


Ši parduotuvė naudoja slapukus, norėdami toliau naršyti rcshop.lt, sutinkate su slapukų naudojimo sąlygomis. SUŽINOTI DAUGIAU