Brushed electric motors of „FOXY Brushed“ range are perfect for a whole lot of model builder's applications - for powering aircraft, boat, car, tank and other ground vehicle models either with direct drive or with a gearbox.
When connecting and installing foxy motors, pay attention to the allowed voltage and load current limit.
Motor cooling: operating temperature of the housing shouldn't exceed 80°C. The model should always have sufficient air intake and air-flow around the motor. For boat models, we recommend using water cooling. High motor loads are possible only for short periods. After every driving/riding/flying session, you should let the motor cool down to a room temperature before the next ride/flight/drive.
FOXY 700 BB Turbo 12V is a brushed electric motor size "700" with a shaft with a diameter 5.0mm and ball bearings. It is suitable for powering aircraft models with direct drive (9x4-6" propeller) or with a gearbox for a small car and boat models (40–45mm propeller).
For controlling the RPM, you will need an ESC with a load capacity of 60–80A.
FOXY 700 BB Turbo 12V is a suitable replacement for a motor SPEED 700 BB Turbo 12V (product number 6317).
Set contains:
- Brushed electric motor FOXY 700 BB Turbo 12V
- User manual
Napětí (jmenovité) [V] | 12 |
Napětí (provozní) [V] | 7.2 - 20 |
Otáčky při jmenovitém napětí [ot./min] | 11600 |
Regulátor [A] | 60 - 80 |
Průměr [mm] | 42.2 |
Délka (skříně) [mm] | 66 |
Průměr hřídele [mm] | 5 |
Volná délka hřídele [mm] | 14 |
Hmotnost [g] | 350 |